How to add pavers to an existing patio – The ladder is too often a muddy mess in the winter. By installing a pavement, homeowners can ensure that the road to the garage, workshop or driveway is a safe, dry walkway. In addition, using the family’s habits through the farm, the new path meets both form and function. This project may require several weekends to complete.
24 Photos Gallery of: How to Add Pavers to an Existing Patio Ideas
How to add pavers to an existing patio with Measure the width of the planned sidewalk. The minimum width for two persons to walk comfortably or wheelchair is 36 inches. This sidewalk plan calls for 8-inch-wide asphalt pavement, though the track will be 40 inches wide. In addition, measure the length of the sidewalk. Multiply the length by width in inches and then divide by 12 to find surfaces of the sidewalk. Enter square foot in an online calculator. Then in the size of the paving stones, which in this case is 8-for-16 inches. The calculator will tell the number of paving stones needed for the project. Add 10 percent to totally allow mistakes and mistake crimes.
Mark the edges on the sidewalk with how to add pavers to an existing patio hose or spray paint. Add 2 inches to the width to make it possible to pinch the card and the bets. Remove grass and soil to a depth of 8 inches with a shovel. Rake the road smoothly, and then pack with the vibrio plate. Sprinkle with water to barely quench the soil and tamp again. Pour 4 inches of gravel in the road, scrub evenly over packed soil. Sprinkle lightly with water and tamp thoroughly.